Konica Minolta BIZHUB C652DS - Manual (Page 283)

bizhub C652/C652DS/C552/C552DS/C452 2-265
2.63 Settings under "Fax Settings" 2
Forward TX Setting
In the administrator mode of PageScope Web Connection, select "Fax Settings" ö "Function Setting" ö
"Forward TX Setting".
Reference
- The Forward TX function transfers the received document to a pre-specified destination.
- This function cannot be configured together with "PC-Fax RX Setting", "TSI User Box Setting", or
"Memory RX Setting".
- The Forward TX Setting can be configured for each line when receiving faxes for each line (two optional
fax kit FK-502 are installed while "RX Setting for each Line" is set to "ON" in "TX/RX Settings").
Item Description
Forward TX Setting Specify whether to use the forward transmission function.
Output Method Select an output function.
Select "Forward & Print" to forward received faxes as well as printing them on
this machine.
Select "Forward & Print (If TX Fails)" to print received faxes on this machine if
they cannot be forwarded.
Forward Destination Specify the forward destination of received faxes.
Specify the destination using one of the three methods: "Select from Address
Book", "Select from Group", and "Direct Input".
Line Setting If two fax kit FK-502 are installed, specify the line used to forward received fax-
es.