Konica Minolta BIZHUB C652DS - Manual (Page 278)

bizhub C652/C652DS/C552/C552DS/C452 2-260
2.63 Settings under "Fax Settings" 2
2.63.2 Configuring settings for telephone and fax lines
Configure settings related to telephone and fax lines including the telephone dialing method, fax receive
mode, and number of incoming calls.
Line Parameter Setting
In the administrator mode of PageScope Web Connection, select "Fax Settings" ö "Line Parameter Setting".
Item Description
Dialing Method Select a dialing method.
Improper configuration of the dialing method may hamper a successful phone
call.
Receive Mode Select a receive mode.
If you select "Auto RX", faxes are received automatically.
If you expect frequent phone calls, for example if an external telephone is con-
nected to this machine, set this mode to "Manual RX".
Number of RX Call
Rings Specify the number of quasi-ring back tone count between fax arrival and the
start of reception.
Number of Redials Specify the number of automatic redials when this machine cannot connect to
the destination because the line is busy.
Redial Interval Specify the interval of redials for automatic redialing.
TEL/FAX Auto Switch Specify whether to automatically switch telephone and fax when an external
telephone is connected to this machine.
This item is displayed for Taiwan models.
External TEL Calling
Monitor Sound Specify whether to output the telephone calling monitor sound from this ma-
chine when an external telephone is connected to this machine.
This item is available when TEL/FAX auto switching is enabled.
External TEL Calling
Time Specify the period from the time an incoming call is received to the time when
an external telephone is called when an external telephone is connected to this
machine.
This item is available when TEL/FAX auto switching is enabled.
Line Monitor Sound Specify whether to hear the line sound from the speaker during communica-
tion.
Line Monitor Sound
Vol. Specify the speaker volume.