Konica Minolta BIZHUB C652DS User Manual
Page 322
bizhub C652/C652DS/C552/C552DS/C452
3-23
3.4
Network Error Codes
3
2241
The certificate has expired.
2242
The CA server rejected the connection.
2243
The connection to the server that checks for expiration of the cer-
tificate has timed out.
2244
Unable to check for expiration because the CRL size exceeds the
maximum capacity that can be retained (1MB).
2261
The format of the certificate is invalid.
2263
Failed to initialize the certificate verification.
2264
Unable to perform verification because there are too many certifi-
cates to be verified (the maximum number of certificates that can
be verified at a time is 20).
2266
Internal error of the certificate verification.
2267
The device certificate does not exist.
2268
No certificate is sent from the server.
3000
An unexpected error occurred.
3001
An unexpected error occurred within the library being used.
3002
An invalid channel is specified.
3003
SMTP server address is invalid.
3004
Parameter error (MIMEBodyHeader).
3005
Parameter error (DisplayName).
3006
Parameter error (character set).
3007
Parameter error (From address).
3008
Parameter error (To address).
3009
Parameter error (CC address).
3010
Parameter error (BCC address).
3011
Parameter error (pEmailSet is NULL).
3012
Parameter error (destination certificate is NULL).
3013
Parameter error (E-mail body).
3014
The HDD is disabled.
3015
The S/MIME function is disabled.
3016
The device certificate cannot be used in S/MIME (e.g. self-signed
certificate error, the private key type is not RSA).
3018
An invalid encryption algorithm is specified.
3019
An invalid signature algorithm is specified.
3020
The E-mail address included in the destination certificate does not
match the destination address (To/Cc/Bcc).
3021
The E-mail address included in the certificate does not match the
sender (From) address.
3022
Format error of the certificate.
3023
Parameter error (Disposition-Notification-To).
3024
Message syntax error of the receiver side.
3025
The SMTP server does not support the STARTTLS command.
3026
PKI card access error.
Function
Code
Description