Konica Minolta BIZHUB C652DS - Manual (Page 279)

bizhub C652/C652DS/C552/C552DS/C452 2-261
2.63 Settings under "Fax Settings" 2
2.63.3 Configuring settings to send or receive faxes
Configure settings related to transmission and reception of faxes including file handling at the time of a polling
transmission and printing method at the time of reception of a fax.
TX/RX settings
In the administrator mode of PageScope Web Connection, select "Fax Settings" ö "TX/RX Settings".
Item Description
Duplex Print (RX) Select whether to print a received fax on both side of sheets.
Letter/Ledger over
A4/A3 Specify whether to use paper in inch-sized paper first when printing received
faxes.
This item is not displayed for Taiwan models.
Print Paper Selection Select the priority order of paper trays used to print received faxes.
If you select "Priority Size", received faxes are printed on paper of the priori-
tized size. If the prioritized size is not specified, received faxes are printed on
paper of the nearest size.
If you select "Fixed Size", receive faxes are always printed on paper of the
specified size.
If "Tray Selection for RX Print" is set to other than "Auto", this item will be set
to "Auto Select".
Print Paper Size Select the size of paper used to print received faxes.
Incorrect User Box No.
Entry Select an action to be taken when the unregistered User Box number is spec-
ified when a fax is received by using User Boxes.
Rx from Rejected Fax
No This item is not available.
Tray Selection for RX
Print If you want to fix the paper tray used to print received faxes, select the paper
try.
If "Print Paper Selection" is set to other than "Auto Select", this item will be set
to "Auto".
Min. Reduction for RX
Print Specify a reduction ratio of received faxes.
When a receive fax does not fit within the standard paper size, this setting is
used to adjust the size.
Print Separate Fax
Pages Select whether to divide a received fax into two or more pages when the doc-
ument is larger than the standard paper size.
File After Polling TX Specify whether to delete a file after completing polling transmission of the file.
No. of Sets (RX) If you need two or more sets of a received fax, specify the number of sets.