Konica Minolta BIZHUB C652DS - Manual (Page 280)

bizhub C652/C652DS/C552/C552DS/C452 2-262
2.63 Settings under "Fax Settings" 2
2.63.4 Configuring settings for the fax functions
Configure settings related to the fax functions.
Function ON/OFF Setting
In the administrator mode of PageScope Web Connection, select "Fax Settings" ö "Function Setting" ö
"Function ON/OFF Setting".
RX Setting for each
Line Specify whether to receive a fax for each line.
This item is available when two optional fax kit FK-502 are installed. This item
is not displayed when "Line 2 Setting" is set to "TX Only" in "Multi Line Set-
tings".
Sender Setting for each
Line Specify whether to register sender information for each line.
This item is available when two optional fax kit FK-502 are installed. This item
is not displayed when "Line 2 Setting" is set to "RX Only" in "Multi Line Set-
tings".
Item Description
Item Description
F-Code TX Select whether to use the F-code transmission function.
This function sends documents to a specific User Box of a remote machine by
entering the SUB address and the sender ID. To use the F-Code for transmis-
sion, the remote machine must support the F-Code function.
Relay RX Select whether to use this machine as a relay distribution station.
A relay distribution station broadcasts documents received from a relay in-
struction station to the relay distribution destinations.
To use the relay distribution function, you must register a relay User Box.
Relay Printing Specify whether to print relayed documents after the relay distribution.
Destination Check Dis-
play Function Select whether to display the list of the specified destinations when sending a
fax.