Konica Minolta BIZHUB C652DS - Manual (Page 290)

bizhub C652/C652DS/C552/C552DS/C452 2-272
2.63 Settings under "Fax Settings" 2
2.63.7 Using extension lines
If two fax kit FK-502 are installed, configure settings for the second line.
Multi Line Settings
In the administrator mode of PageScope Web Connection, select "Fax Settings" ö "Multi Line Settings".
Remarks Print Setting Configure settings to print remarks for activity reports.
If you select "Normal Print", the line status or sending setting will be printed.
If User Authentication or Account Track is not enabled, the mode is set to
"Normal Print".
If you select "Print User Name", the user name will be printed. This item is
available when User Authentication is enabled.
If you select "Print Account Name", the account name will be printed. This item
is available when Account Track is enabled.
Network Fax RX Error
Report Specify whether to print reception error reports when using the network fax
function.
MDN Message Specify whether to print a report when receiving the response to a MDN re-
quest.
DSN Message Specify whether to print a report when receiving the response to a DSN re-
quest.
Print E-mail Message
Body Specify whether to print the message body of an E-mail message received
successfully.
Item Description
Item Description
Line Parameter Setting Configure line parameters for the extension line.
Dialing Method Select a dialing method for the extension line.
Number of RX Call
Rings Specify the number of quasi-ring back tone count between fax arrival and the
start of reception.
Line Monitor Sound Specify whether to hear the line sound from the speaker during communica-
tion.
Function Setting Configure settings for the extension line function.
PC-FAX TX Setting Select the line used for PC-FAX transmission.
Multi Line Usage Set-
tings Configure the operation settings of Line 2 (an extension line).