8 registering the sender name and fax id, Header information, Registering the sender name and fax id – Konica Minolta BIZHUB C652DS User Manual

Page 291: P. 2-273

Advertising
background image

bizhub C652/C652DS/C552/C552DS/C452

2-273

2.63

Settings under "Fax Settings"

2

2.63.8

Registering the Sender Name and Fax ID

You can register the sender name and fax ID of this machine.

Reference

-

The sender name can be registered for each line when registering sender information for each line (two
optional fax kit FK-502 are installed while "Sender Setting for each Line" is set to "ON" in "TX/RX
Settings").

Header Information

In the administrator mode of PageScope Web Connection, select "Fax Settings" ö "Header Information".

Line 2 Setting

Specify the communication method for Line 2 (an extension line).
You can specify TX Only, RX Only, or TX and RX only for an extension line.

Sender Fax No.

Enter the sender Fax number. Usually enter the fax number of the fax machine.
The registered fax number is printed as the sender information on the fax re-
ceived by the recipient.

Item

Description

Item

Description

Sender Fax No.

Enter the fax ID (up to 20 numerals, including #, *, +, and space).
Normally enter the fax number of this machine.
This setting is not required when sending an Internet fax.

For 1 lines:
Default
For 2 lines:
Line 1 Default

Specify the default sender name to be used for line 1.
If the sender name is not specified when sending a fax, the default specified
in this item is printed on an original.

Advertising
This manual is related to the following products: