Konica Minolta bizhub 20 - Manual (Page 29)

Chapter 3
20
Paper Size
3
You can use ten sizes of paper for printing
copies: A4, Letter, Legal, Executive, A5,
A5 L, A6, B5, B6 and Folio and four sizes for
printing faxes: A4, Letter, Legal and Folio.
When you change the size of paper in the
tray, you will also need to change the setting
for paper size at the same time so your
machine can fit the document or an incoming
fax on the page.
a
Do one of the following:
 To set the paper size for the
MP Tray press Menu, 1, 2, 2, 1.
 To set the paper size for Tray#1
press Menu, 1, 2, 2, 2.
 To set the paper size for Tray#2
1
press Menu, 1, 2, 2, 3 if you installed
the optional tray.
1
Tray#2 Only or T2 appears only if the
optional tray is installed.
b
Press a or b to choose A4, Letter,
Legal, Executive, A5, A5 L, A6, B5,
B6, Folio or Any.
Press OK.
c
Press Stop/Exit.
Note
• Legal, Folio and Any size appears only
when you choose the MP tray.
• If you choose Any for the MP Tray Paper
Size: You must choose MP Only for the
Tray Use setting. You cannot use the Any
Paper Size selection for the MP tray when
making N in 1 copies. You must choose
one of the other available Paper Size
selections for the MP tray.
• A5 L and A6 size are not available for the
optional Tray#2.
• If you chose Transparency for the
Paper Type you will only be able to
choose Letter, Legal, Folio or A4
size paper in step b.