Konica Minolta FK-102 - Manual (Page 42)

Simple FAX Transmission - (continued)
2-4
5.
Press [START].
When [START] is pressed, the machine begins to scan the original and transmission
begins starting with the first page that is scanned.
■ The following screen will appear if the Tx result report select screen is programmed
to appear. If you want to print the Tx result report, press YES.
•
If the transmission fails, Tx result report is outputted. For details, see "Transmission
Report" (p. 11-8).
•
Refer to "Report Output set" (p. 10-27) regarding Tx result report select screen.
•
Press [STOP/CLEAR] to interrupt transmission.
•
When the facsimile cannot be sent, refer to "Cannot Send Messages" (p. Appendix-4)
FOR DETAILS