Konica Minolta FK-102 - Manual (Page 69)

2-31
0
Simple FAX
Transmission
Placing the
Original on the
Machine
Setting
Transmission
Conditions
Selecting a
Remote Station
Operation
During
Scanning
Operation
During
Transmission
Reserving
Transmission
Manual
Transmission
Canceling
Transmission
Confirming
Reserved
Documents
Confirming
Communica-
tion Results
Memory
Transmissions
Total page set
Timer
Transmission
International
Communication
Sender
Information
2
Transmission
Manual Transmission
This operation is performed when sending documents and confirming the status of the receiving
machine.
Memory transmission cannot be used with manual transmission.
1.
Press [FAX] on the control panel to display the FAX Basic
screen.
2.
Place the original.
For details, see "Placing the Original on the Machine" (p. 2-5).
3.
Press Off hook.
If Rx has been selected, press Tx to switch to the transmission mode.
4.
Set the functions of Setting as necessary.
•
See "Setting Transmission Conditions" (p. 2-10) for setting functions on the FAX Basic
screen.
•
See "Opening the Application Screen" (p. 6-2) for setting functions on the FAX Application
Menu screen.
5.
Select the remote station with the key pad.
•
You can input up to 60 digits.
•
Pressing On hook returns the display to the FAX Basic screen.
•
When an external telephone is connected, documents can be sent by lifting up the
receiver of the external telephone.
HINT
HINTS
FOR DETAILS