Konica Minolta Magicolor 5440 DL - Manual (Page 113)

Clearing Media Misfeeds 103
4
Pull out Tray 1, and then remove
all media from the tray.
5
Fan the media you removed and
then align it well.
!"
If transparencies are loaded, do not fan them; otherwise, static
electricity may be produced, resulting in another media misfeed.
6
Load the media face up in Tray 1.
!"
Make sure that the media is flat.
!"
Do not load paper above the M mark.
!"
Slide the media guides against the edges of the media.
7
Close Tray 1.