Konica Minolta Magicolor 5440 DL - Manual (Page 130)

Solving Other Problems 120
You hear
unusual
noises. The printer is not
level. Place the printer on a flat, hard, level
surface.
The tray is not
installed correctly. Remove the tray that you are printing
from and reinsert it completely into the
printer.
There is a foreign
object stuck inside
the printer. Turn off the printer and remove the
object. If you cannot remove it, contact
Technical Support.
The
web-based
utility cannot
be accessed. The PageScope Web
Connection Adminis-
trator’s password is
incorrect. The PageScope Web Connection
Administrator password has a 6-char-
acter minimum and a 16-character
maximum. For details of the Page-
Scope Web Connection administrator
password, refer to the magicolor
5440 DL Reference Guide.
Media is
wrinkled. The media is moist
from humidity or hav-
ing water spilled on it. Remove the moist media and replace it
with new, dry media.
The transfer roller or
fuser unit is defective. Check them for damage. If necessary,
contact Technical Support with the
error information.
Unsupported media
(wrong size, thick-
ness, type, etc.) is
being used. Use KONICA MINOLTA-approved
media. See “Media Specifications” on
page 38.
Symptom Cause Solution