Konica Minolta Magicolor 5440 DL - Manual (Page 136)

Solving Problems with Printing Quality 126
If the problem is not resolved, even after all of the above have been per-
formed, contact Technical Support with the error information.
For contact information, refer to the magicolor 5440 DL General Information
Guide.
Line art does
not print in
color. The line art setting for
2400 x 600 dpi
requires Color Match-
ing to be turned off. In the driver, go to Properties/Quality
and choose Off in the Color Matching
section.
Lower the resolution to 1200 x 600 or
600 x 600 dpi.
The color
has a poor
reproduction
or has poor
color density. One or more of the
toner cartridges may
be defective. Remove the toner cartridges and
check them for damage. If one is dam-
aged, replace it.
Symptom Cause Solution