Introduction, Antistatic protection, Introduction 136 antistatic protection 136 – Konica Minolta Magicolor 5440 DL User Manual

Page 146

Advertising
background image

Introduction

136

Introduction

Note

Use of accessories not manufactured or supported by
KONICA MINOLTA will void your warranty.

!"

This chapter provides information about the following accessories.

!"

For details on installing and using the Camera Direct Photo Print
Card, refer to the Installation Manual included with the Camera
Direct Photo Print Card. To purchase the Camera Direct Photo
Print Card, contact your local vendor or visit printer.konicami-
nolta.com.

Note

Installing accessories always requires that the printer and accessories
are turned off and unplugged during installation.

Antistatic Protection

Note

Before opening and handling the dual in-line memory module (DIMM),
first touch a metal part of the printer to avoid an electrostatic charge
building up. When the DIMM is taken out of its conductive bag, hold it
by its edges to avoid touching the electronic circuits. When handling
the DIMM, be sure to place it on an anti-static mat or a piece of
aluminum foil.

Dual In-Line
Memory Module
(DIMM)

64 MB, 128 MB, 256 MB, 512 MB DIMM (Buffered)

Duplex Option

Auto duplexing

Lower Feeder Unit
(Tray 2/3)

500-sheet tray included

Camera Direct
Photo Print Card

When using direct printing, the optional Camera
Direct Photo Print Card must be installed.

Advertising