Replacing the transfer belt unit, Replacing the transfer belt unit 81, Installing a lower feeder unit 143 – Konica Minolta Magicolor 5440 DL User Manual
Page 91
Advertising
Replacing Consumables
81
Replacing the Transfer Belt Unit
When the time to replace the transfer belt unit is reached, the message
TRANSFER END
appears. Printing can continue even after this message
appears; however, since the print quality is reduced, the transfer belt unit
should be replaced immediately.
1
Open the printer’s front cover.
2
Turn the dial to unlock the
waster toner bottle.
3
Pull out the waste toner bottle
and the toner cartridges for
about 10 cm (4").
Lock
Unlock
Advertising