Installation, Installing the appliance, Safe use of the appliance – AEG MCD1751E User Manual

Page 45

Advertising
background image

43

Installation

INSTALLING THE APPLIANCE

1. Remove all packaging and check carefully for any

signs of damage.

2. If fitting the microwave oven above a conventional

oven (position A) then use the mylar sheet provided.
a. Cut the Mylar sheet to fit the internal width of

the unit.

b. Peel back the protective cover on the tape and fix

to the rear of the shelf
so that it covers
the service
gap. (See
diagram).

3. Fit the appliance into the kitchen cupboard slowly,

and without force, until the front frame of the oven
seals against the front opening of the cupboard.

4. Ensure the appliance is

stable and not leaning.
Ensure that a 5mm gap is
kept between the cupboard
door above and the top of
the frame (see diagram).

5. Fix the oven in position with the

screws provided.
The fixing points are located on
the top and bottom corners of
the oven (see diagram, item 10,
on page 5).

6. It is important to ensure that the installation of this

product conforms to the instructions in this
operation manual and the hob or conventional oven
manufacturer’s installation instructions.

5 mm

Mylar sheet

Conventional

oven

Internal width

Service gap

If fitting the microwave in position B or C:

• The cupboard must be a minimum of

500mm (E) above the worktop & must not
be installed directly above a hob.

• This appliance has been tested and

approved for use near domestic gas,
electric and induction hobs only.

• Sufficient space between hob and

microwave should be allowed to prevent
overheating of microwave oven,
surrounding cupboard and accessories.

• Do not operate the hob without pans

when the microwave oven is operating.

• Care should be taken when attending to

the microwave oven while the hob is on.

SAFE USE OF THE APPLIANCE

E

D

Position A

Position B

Position C

Position D

Conventional

oven

POSITION

NICHE SIZE

CHIMNEY

Gap Between

W

D

H

(min)

Cupboard & Ceiling

A

560 x 550 x 360

50

50

B + C

460 x 300 x 360

18

50

560 x 300 x 360

18

50

D

460 x 500 x 360

40

50

560 x 500 x 360

40

50

Measurements in (mm)

Chimney

Chimney

1. AG-61+62D-UK English 20/05/2004 15:26 Page 43

Advertising
This manual is related to the following products: