Care and cleaning, 1 steam cleaning, 2 shelf support removing the shelf support – AEG KS8100001M User Manual

Page 38

Advertising
background image

12. CARE AND CLEANING

WARNING!
Refer to the Safety chapters.

Notes on cleaning:
• Clean the front of the appliance with a

soft cloth with warm water and a
cleaning agent.

• To clean metal surfaces, use a usual

cleaning agent.

• Clean the appliance interior after each

use. Then you can remove dirt more
easily and it does not burn on.

• Clean stubborn dirt with a special

oven cleaner.

• Clean all accessories after each use

and let them dry. Use a soft cloth with
warm water and a cleaning agent.

• If you have nonstick accessories, do

not clean them using aggressive
agents, sharp-edged objects or a dish-
washer. It can cause damage to the
nonstick coating.

12.1 Steam Cleaning

1.

Remove the worst of the dirt man-
ually.

2.

Put 250 ml of water with 3 table-
spoons of vinegar directly into the
steam generator.

3.

Activate the Steam Cleaning func-
tion in the main menu. The display
shows the duration of the function.

4.

An acoustic signal sounds when the
programme is completed. Touch a
sensor field to deactivate the signal.

5.

Wipe out the appliance with a soft
cloth. Remove the remaining water
from the steam generator.

6.

Keep the appliance door open for
approximately 1 hour. Wait until the
appliance is dry.

12.2 Shelf support

Removing the shelf support

You can remove the shelf support to
clean the side walls.

1.

Carefully pull the support up and out
of the front catch.

2.

Lightly move the support on the
front catch inwards.

38 www.aeg.com

Advertising