AEG BE3003021M - Manual (Page 11)

Oven function Application
Pyro Cleaning For automatic pyrolytic cleaning of the oven. It burns off
residual dirt in the oven. The oven heats up to approxi-
mately 500°C.
Fast heat up function
The fast heat up function decreases the heat up time.
1.
Set the fast heat up function. Refer to Oven function table.
2. Turn the temperature control knob / to set a temperature.
3. An acoustic signal sounds when the appliance is at the set temperature.
The fast heat up function does not deactivate after the acoustic signal. You must deactivate
the function manually.
4.
Set an oven function.
Display
1 Timer
2 Heating Up / Residual heat indicator
3 Water tank (selected models only)
4 Core temperature sensor (selected
models only)
5 Door lock (selected models only)
6 hr / min
7 Clock functions
1 7 2 3
4 5 6 7
Buttons
Button Function Description
CLOCK To set the clock function.
, MINUS, PLUS To set a value for time
MINUTE MINDER To set the minute minder. To switch ON/OFF
light in oven cavity, hold button more than 3
seconds
TEMPERATURE To check temperature inside the oven cavity.
To check the Core Temperature Sensor tem-
perature, when is connected (if applicable).
Use only when the oven function is set.
Heat-up / Residual heat indicator
If you activate an oven function, the bars in the display come on one by one. The bars
show that the oven temperature increases or decrease.
Daily use 11