Before first use, Initial cleaning, First connection to the mains – AEG BE3003021M User Manual
Page 9: Setting the time of day
• Core Temperature Sensor
To measure how far the food is cooked.
BEFORE FIRST USE
WARNING!
Refer to "Safety information" chapter.
Initial Cleaning
• Remove all parts from the appliance.
• Clean the appliance before first use.
Refer to chapter "Care and Cleaning".
First connection to the mains
After first connection to the mains all symbols in the display are on for some seconds. For
the subsequent few seconds the display shows software version.
Setting the time of day
After the software version goes off, the display shows
and "12:00". "12" flashes.
1.
Press or to set current hour.
2.
Press to confirm (necessary only for the first setting, later new time will be saved
automatically after 5 seconds).
The display shows
and set hour. "00" flashes.
3.
Press or to set current minutes.
4.
Press to confirm (necessary only for the first setting, later new time will be saved
automatically after 5 seconds) .
The Temperature/Time display shows new time.
Changing the time of day
You can change the time of day only if the oven is off.
Press . The set time and symbol flash in the display. To set new time use the proce-
dure "Setting the time of day".
Before first use
9