AEG BE3003021M - Manual (Page 14)

2. Put the point of the core temperature
sensor (with the symbol
on the
handle) into the centre of the meat.
3. Put the core temperature sensor plug in
the socket on the front of the appliance.
The display shows core temperature
sensor symbol and default core temper-
ature. When you use the core tempera-
ture sensor for the first time, the display
shows 60°C as the default core temper-
ature.
flashes.
The core temperature sensor must stay in the
meat and in the core temperature sensor
socket during the cooking process.
If you change the core temperature the new value will be saved and displayed during next
use of the core temperature sensor.
4.
Use the control knob for temperature to change the temperature value for core tem-
perature sensor
5. Press or the settings save automatically after 10 seconds.
6. When the meat is at the set core temperature, the symbol for the core temperature
and core temperature sensor flash. An acoustic signal operates for two minutes.
Press any button to stop an acoustic signal.
7. Remove the core temperature sensor plug from the socket . Remove the meat from
the appliance.
8. Deactivate the appliance.
Every time you put the core temperature sensor in the socket, you need to set the duration
and end time again.
When the appliance calculates the provisional duration time for the first time, the Timer/
Residual heat display shows "-" that changes position. When the first calculation ends, the
Timer/Residual heat display shows the duration of the cooking process. Calculations are
running in the background during the cooking process. Display is updated from time to
time with new duration value.
When you put the core temperature sensor plug into the socket, the display shows
current core temperature. You can change the temperature at any time. Press the
temperature button and use +/- shuttle to change the temperature:
• press once - the display shows set core temperature which changes after every 10 sec-
onds to current core temperature;
• press twice - the display shows current oven temperature which changes after every 10
seconds to set oven temperature;
• press three times - the display shows oven set temperature.
14 Using the accessories