AEG BP8314001M - Manual (Page 16)

The display shows: the cooking time, the
duration symbol , a default weight, a
unit of measurement (kg, g).
4. Touch
or the settings save
automatically after five seconds.
The appliance activates.
5. You can change the default weight
value with or . Touch .
6. When the set time ends, an acoustic
signal sounds for two minutes.
flashes.
The appliance deactivates.
7. Touch a sensor field or open the
door to stop the acoustic signal.
8.5 Automatic programmes
with the core temperature
sensor
The core temperature of the food is
default and fixed in programmes with the
core temperature sensor. The
programme ends when the appliance is
at the set core temperature.
1. Activate the appliance.
2. Touch again and again until the
display shows .
3. Install the core temperature sensor.
Refer to "Core temperature sensor".
4. Touch or to set the
programme for the core temperature
sensor.
The display shows the cooking time,
and .
5. Touch
or the settings save
automatically after five seconds.
When the set time ends, an acoustic
signal sounds for two minutes.
flashes. The appliance deactivates.
6. Touch a sensor field or open the
door to stop the acoustic signal.
9. USING THE ACCESSORIES
WARNING!
Refer to Safety chapters.
9.1 Core temperature sensor
There are two temperatures to be set:
the oven temperature and the core
temperature.
The core temperature sensor measures
the core temperature of the meat. When
the meat is at the set temperature, the
appliance deactivates.
CAUTION!
Only use the core
temperature sensor supplied
or the correct replacement
parts.
The core temperature sensor
must stay in the meat and in
the socket during the
cooking.
1. Activate the appliance.
2. Put the point of the core temperature
sensor (with on the handle) into
the centre of the meat.
3. Put the plug of the core temperature
sensor into the socket at the front of
the appliance.
The display shows flashing and the
default set core temperature. The
temperature is 60 °C for the first
operation, and the last set value for each
subsequent operation.
When you put the core
temperature sensor into the
socket, you cancel the
settings for the clock
functions.
www.aeg.com 16