1 notes on cleaning, 2 removing the shelf supports, 3 pyrolysis – AEG BP8314001M User Manual

Page 35

Advertising
background image

12.1 Notes on cleaning

• Clean the front of the appliance with a

soft cloth with warm water and a

cleaning agent.

• To clean metal surfaces, use a usual

cleaning agent.

• Clean the appliance interior after

each use. Fat accumulation or other

food remains may result in a fire. The

risk is higher for the grill pan.

• Clean stubborn dirt with a special

oven cleaner.

• Clean all accessories after each use

and let them dry. Use a soft cloth with

warm water and a cleaning agent.

• If you have nonstick accessories, do

not clean them using aggressive

agents, sharp-edged objects or a

dishwasher. It can cause damage to

the nonstick coating.

12.2 Removing the shelf

supports

To clean the oven, remove the shelf

supports.
1. Pull the front of the shelf support

away from the side wall.

2. Pull the rear end of the shelf support

away from the side wall and remove

it.

1

2

Install the shelf supports in the opposite

sequence.

12.3 Pyrolysis

CAUTION!

Remove all accessories and

removable shelf supports.

The pyrolytic cleaning

procedure cannot start:

• if you did not remove the

core temperature sensor

plug from the socket. In

some models, the display

shows "C2" when this

error occurs.

• if you did not fully close

the oven door. In some

models, the display

shows "C3" when this

error occurs.

CAUTION!

If there are other appliances

installed in the same

cabinet, do not use them at

the same time as the

Pyrolysis function. It can

cause damage to the

appliance.

During the pyrolytic cleaning the door is
locked. The symbol and the bars of

the heat indicator come up, until the

door unlocks. The door unlocks when the

temperature inside the oven is under

safety conditions and the pyrolytic

cleaning finishes.
During the pyrolytic cleaning the lamp is

deactivated.
1. Remove the worst dirt manually.

2. Clean the inner side of the door with

hot water, so that the residues do not

burn from the hot air.

3. Set the Pyrolysis function (refer to

"Oven functions").

4. Touch

or

to set the duration

of the cleaning procedure:

ENGLISH

35

Advertising