AEG MC 4421 CD-MP3 N - Manual (Page 44)

English
44
The  button can be used as follows:
Press once =
This starts the current track again from
the beginning.
Press twice = This jumps back to the previous track.
Press three times = This plays the song before etc. If the
button is kept pressed down, the
machine starts to search through the
tracks.
(13)
The playback is stopped.
REPEAT (3)
During the playback of an audio CD:
Press once = the current track is repeated continu-
ously. The notification “REP” will ap-
pear in the display.
Press twice = the whole CD is played continuously.
The notification “REP ALL” will appear
in the display.
Press three times = The notification “RAND” will appear in
the display. All the titles will be played
back successively in a random se-
quence.
Press four times = all functions are cancelled. The normal
play mode is resumed.
During playback of MP3 music:
Press once = the current track is repeated continu-
ously. The notification “REP” will ap-
pear in the display.
Press twice = the selected folder is repeated con-
tinuously (REP FOLDER appears in the
display).
Press three times = all music titles are repeated continu-
ously. The notification “REP ALL” will
appear in the display.
Press four times = The notification “RAND” will appear in
the display. All the titles will be played
back successively in a random se-
quence.
Press five times = all the functions are deactivated. Play-
back is continued normally.
M+/M- (11)
• During the music playback, press one of the buttons to
skip 10 titles forward or back (if more than 10 titles are on
the storage medium).
• In radio mode for connecting to the preset radio stations.
SLEEP (Sleep timer) (8)
When the device is turned on, you can set the time after
which the device will automatically switch to standby.
• Press the SLEEP button repeatedly to reduce the time in
steps of 10.
• To have the remaining time displayed to you, briefly press
the SLEEP button.
NOTE:
The activated function cannot be shown in the display for
technical reasons.
Programmed Play
This can be used to program any desired sequence of tracks.
1. Press the button (13).
2. Press the MEM/PROG button (1). “P01” (Storage space)
and the notification “PROG” will appear in the display.
Use the / buttons (4) to select the desired track and
then press the MEM/PROG button again. The display
changes to memory slot P02.
3. Select the next track with the / buttons and press the
MEM/PROG button again. Repeat the procedure until all
the desired tracks are selected.
4. Press the button (12). The playback starts. The notifi-
cation “PROG” will appear additionally in the display.
The device stops automatically after all programmed titles
have been played. The notification PROG will switch off and
the programmed sequence will be deleted from the memory.
Deleting the programming
Press the button. The programmed sequence will be
deleted from the memory.
Playing back Music in MP3 Format
With this device it is possible to play back pieces of music in
MP3 format. The device also supports all standard CD types:
CD, CD-RW, CD-R.
This machine of is able to play MP3 CDs. Up to 200 tracks
can be compressed and stored on these CDs. Your machine
detects an MP3 CD automatically (the total number of tracks
and MP3s appears in the display). If you would like to play
one of these CDs, proceed as described under “Playing
CDs/MP3”. Tracks can be programmed as described under
“Playing Back Programmed Tracks”.
Please note:
There are a number of different recording and compression
methods, as well as quality differences between CDs and self-
recorded CDs.
Furthermore, the music industry does not adhere to fixed
standards (copy protection).
For these reasons it is possible that in rare cases there are
problems with the playback of CDs and MP3 CDs. This is
not
a malfunction of the device.