Olympus EVOLT E-510 - Manual (Page 102)

102
EN
Getting to know your camera better
8
Leaving set functions in the camera so that they can be used later
You can register up to two current camera settings in [MY MODE SETUP]. To call up and
use My Mode settings, [
; FUNCTION] must be set to [MY MODE]. If you press down the
< button while taking the picture, the picture can be taken with the registered settings.
g “; FUNCTION” (P. 79), “My Mode setting” (P. 80)
Playback tips
Understanding the settings and other information of pictures taken
Play back a picture, and press the INFO button. Press the button repeatedly to change the
amount of information displayed. g “Information display” (P. 67)
Viewing pictures on a computer
Viewing the entire picture on a computer screen
The size of the picture displayed on a computer screen changes depending on the computer
settings. When the monitor setting is 1024 × 768 and you are using Internet Explorer to view
a picture with an image size of 2048 × 1536 at 100%, the entire picture cannot be viewed
without scrolling. There are several ways you can view the entire picture on the computer
screen.
View the picture using image browsing software
• Install the OLYMPUS Master software from the provided CD-ROM.
Change the monitor setting
• The icons on the computer desktop may be rearranged. For details of changing the settings on
your computer, refer to the computer’s manual.
To view recorded images in RAW
Install the OLYMPUS Master software from the provided CD-ROM. You can use the RAW
development function in OLYMPUS Master to develop the RAW image in the camera setting
used during shooting, as well as change detailed settings of exposure compensation and
white balance.
s0010_e_00_unified.book Page 102 Monday, April 9, 2007 6:12 PM