Olympus EVOLT E-510 - Manual (Page 87)

EN
87
Pr
inting
6
Resetting the print reservation data for a selected picture
2
Select [ <] and press the i button.
3
Select [KEEP] and press the i button.
4
Use bd to select the frame with print reservation data you want to reset,
then press c to set the number of prints to 0.
5
Press the i button when you have finished.
6
Use i to select the date and time format.
• This setting is applied to all frames with print reservation data.
7
Select [SET] and press the i button.
By connecting the camera to a PictBridge-compatible printer with the USB cable, you can
print out recorded pictures directly. To find out if your printer is compatible with PictBridge,
refer to the printer’s manual.
PictBridge
The standard that enables digital cameras and printers made by different manufacturers to
be connected, and also allows pictures to be printed directly from the camera.
STANDARD
All printers that support PictBridge have standard print settings. By selecting [STANDARD]
on the settings screens (
gP. 89), you can print pictures according to these settings. For
details on your printer’s standard settings, refer to the printer’s manual or contact the printer
manufacturer.
Direct printing (PictBridge)
x Notes
• Use a fully charged battery for printing.
• Images recorded in RAW data cannot be printed.
• The camera will not enter sleep mode while it is connected to the USB cable.
• The available print modes and settings such as paper size vary with the type of printer. For
details, refer to the printer’s manual.
• For details on printing paper types, ink cassettes, etc., refer to the printer’s manual.
s0010_e_00_unified.book Page 87 Monday, April 9, 2007 6:12 PM