Olympus EVOLT E-510 - Manual (Page 81)

EN
81
Customizing the settings/f
unctions of your camera
5
Quick erase
This lets you erase the picture you have just taken immediately using the S (erase) button.
MENU[Y][QUICK ERASE]
[OFF] When the S (erase) button is pressed, the confirmation screen appears, asking
you if you want to erase the picture.
[ON] Pressing the S (erase) button erases the picture immediately.
Erasing RAW and JPEG files
This lets you select the method to erase images recorded in RAW+JPEG. It is a function
effective only when deleting one frame.
MENU[Y][RAW+JPEG ERASE]
[JPEG] Erases all JPEG image files, leaving only the RAW image files.
[RAW] Erases all RAW image files, leaving only the JPEG image files.
[RAW+JPEG] Erases both image file types.
File name
When you take a picture, the camera assigns it a unique file name and saves it in a folder.
The folder and file name can later be used for file handling on a computer.
File names are assigned as shown in the illustration below.
MENU[Z][FILE NAME]
[AUTO]
Even when a new card is inserted, the folder numbers are retained from the previous
card. If the new card contains an image file whose file number coincides with one
saved on the previous card, the new card’s file numbers start at the number following
the highest number on the previous card.
[RESET]
When a new card is inserted, folder numbers start at 100 and file numbers start at
0001. If a card containing images is inserted, the file numbers start at the number
following the highest file number on the card.
• When both the Folder and File No. reach their respective maximum number (999/9999), it is not
possible to store additional pictures even if the card is not full. No more pictures can be taken.
Replace the card with a new one.
x Notes
• This function is effective only if deleting one frame. For all-frame erase or erasing selected
frames, both RAW and JPEG will be erased regardless of this setting.
s0010_e_00_unified.book Page 81 Monday, April 9, 2007 6:12 PM