Olympus EVOLT E-510 - Manual (Page 83)

EN
83
Customizing the settings/f
unctions of your camera
5
Backlight timer
To save battery power, after the control panel is displayed for a specified period of time, the
monitor backlight turns off and the monitor darkens. [HOLD] sets the backlight to stay on.
The monitor backlight turns on again as soon as you touch any button (the shutter button,
arrow pad, etc.).
MENU[Z][BACKLIT LCD]
[8SEC]/[30SEC]/[1MIN]/[HOLD]
USB mode
You can connect the camera directly to a computer or printer with the provided USB cable. If
you specify the device you are connecting to beforehand, you can skip the USB connection
setting procedure normally required every time you connect the cable to the camera. For
details on how to connect the camera to either device, refer to “Connecting the camera to a
printer” (
g P. 88) and “Connecting the camera to a computer” (g P. 92).
MENU[Z][USB MODE]
[AUTO]
The selection screen for the USB connection will be displayed every time you connect
the cable to a computer or printer.
[STORAGE]
Allows you to transfer images to a computer. Also, select to use the OLYMPUS
Master software via PC connection.
[MTP]
Allows you to transfer images to a computer running Windows Vista without using the
OLYMPUS Master software.
[CONTROL]
Allows you to control the camera from a PC using the optional OLYMPUS Studio.
[ <EASY]
Can be set when connecting the camera to a PictBridge-compatible printer. Pictures
can be printed directly without using a PC.
g “Connecting the camera to a printer” (P. 88)
[ <CUSTOM]
Can be set when connecting the camera to a PictBridge-compatible printer. You can
print out pictures with set number of prints, print paper and other settings.
g “Connecting the camera to a printer” (P. 88)
Changing the display language
You can change the language used for the on-screen display and error messages from
ENGLISH to another language.
MENU[Z][W]
Use ac to select the language you want to use.
• You can add another language to your camera with the provided OLYMPUS Master software.
For details, refer to Help in OLYMPUS Master software. g “Using the OLYMPUS Master
software” (P. 91)
Video output
This lets you select NTSC or PAL according to your TV’s video signal type.
You will need to set this when you want to connect the camera to a TV and play back images
in a foreign country. Make sure the correct video signal type is selected before connecting the
video cable. If you use the wrong video signal type, recorded pictures will not play back
properly on your TV.
MENU[Z][VIDEO OUT]
[NTSC]/[PAL]
s0010_e_00_unified.book Page 83 Monday, April 9, 2007 6:12 PM