Olympus C-5050 Zoom - Manual (Page 113)

112
6
Ad
van
ce
d sho
o
ti
ng
Sequential shooting
There are 4 sequential shooting modes: high speed sequential shooting,
sequential shooting, AF sequential shooting and auto bracketing. Sequential
shooting modes can be selected from the DRIVE mode menu.
Sequential shooting cannot be performed when the record mode is set to TIFF.
Drive mode
Shoots 1 frame at a time when the shutter button is pressed.
(Normal shooting mode, single-frame shooting)
Pictures can be taken at a faster speed than normal sequential
shooting. The sequential shooting speed varies depending on the
record mode setting.
4 frames at 3.3 frames/sec. (3 frames in SHQ ENLARGE SIZE mode)
Focus, exposure and white balance are locked at the first frame.
Approx. 11 frames at 1.7 frames/sec. (in HQ mode)
Focus is individually locked for each frame. The AF sequential
shooting speed is slower than for normal sequential shooting.
BKT “Auto bracketing” (P.113)
High speed sequential shooting, sequential
shooting and AF sequential shooting
1
In the top menu, select MODE MENU
→ → → → CAMERA → → → → DRIVE → → → → ,
or , and press .
“How to use the menus” (P.70)
• Press again to exit the menu.
2
Take the picture.
• Press the shutter button fully and keep it
pressed. The camera will take pictures in
sequence until you release the button.
• You are recommended to use the
viewfinder for sequential shooting.
During sequential shooting, the subject
does not appear on the monitor.
Mode dial
Arrow pad
OK button
CARD
SEt
PIC
CAMERA
DRIVE
ISO
MY MODE
FLASH
SLOW
AF
BKt
HI