Olympus C-5050 Zoom - Manual (Page 152)

151
8
Pl
ay
ba
ck
Playback on a TV
Use the AV cable provided with the camera to play back recorded images on
your TV.
1
Make sure that the TV and camera are turned off. Connect
the A/V OUT jack on the camera to the Video input
terminal on the TV using the AV cable.
2
Turn the TV on and set it to the video input mode.
• For details of switching to video input, refer to your TV’s instruction
manual.
3
Turn the camera on and set the mode dial to .
• The last picture taken is displayed on the TV. Use the arrow pad to
select the picture you want to display.
• The close-up playback, index display and slideshow functions can also
be used on a TV screen.
TIPS
• You are recommended to use the optional AC adapter when using
the camera with a TV.
• Make sure that the camera’s video output signal type is the same as
the TV’s video signal type. “Video output selection” (P.192)
• The camera’s monitor turns off automatically when the AV cable is
connected to the camera.
• Be sure to use the AV cable provided to connect the camera to the TV.
• The picture may appear off-center on the TV screen.
• When pictures are compressed in order to fit the entire picture on the
TV screen, a black frame appears around the picture. If the picture is
output to a video printer via the TV, the black frame may be printed.
Mode dial
Connect to the TV’s video
input (yellow) and audio
input (white) terminals.
A/V OUT jack (MONO)
AV cable
Note