Olympus C-5050 Zoom - Manual (Page 209)

208
Troubleshooting
11
Misc
ella
ne
ous
A write-protect seal is
attached to the SmartMedia
card. Insert a new card or remove the write-
protect seal. P.25
There is a problem with the
card. Refer to the “Error codes”. P.205
The flash does not fire.
Possible cause Corrective action Ref. Page
The flash is set to the flash off
mode. Select a flash mode other than flash off. P.79
The subject is illuminated. If you want the flash to fire on a brightly
illuminated subject, set the flash to fill-in
mode. P.79
Sequential shooting
(
, , ,
BKT) is set.
The flash does not fire in the sequential
shooting mode.
Set
in the DRIVE menu.
P.112
The camera is in the movie
mode. The flash does not fire in the movie mode.
Set a different shooting mode. P.48
FUNCTION is set to BLACK/
WHITE BOARD. The flash does not fire in the BLACK/
WHITE BOARD mode. P.121
Super macro mode is set. The flash does not fire in the super macro
mode. Set the super macro mode to OFF. P.108
Panorama mode is set. The flash does not fire in the panorama
mode. Cancel the panorama mode. P.116
The green and orange lamps on the right of the viewfinder blink simultaneously.
Possible cause Corrective action Ref. Page
The batteries are exhausted. Replace the batteries with new ones. P.21
The monitor does not turn on.
Possible cause Corrective action Ref. Page
The camera is in the sleep
mode. Operate the camera (press the shutter
button or the zoom lever). P.31