Olympus D-150-C-1 - Manual (Page 34)

34
BASIC SHOOTING OPERATIONS
Shooting Using the Monitor
Check that the lens barrier is
open.
Operating Procedure
Monitor button
Monitor
1.
Press the monitor button.
[ The monitor turns on.
2.
Determine the image composition by
observing your subject in the monitor.
3.
Half-press the shutter button to focus
on the subject, and then press it all
the way to take the picture. (This
operation is identical to the Shooting
Using the Viewfinder) (
Page 32).
[ The orange lamp on the right of the
viewfinder blinks for a moment while the
image is being written to the card and
then goes out.
ⅷOblique lines on the subject may appear as zigzag lines on the monitor,
but this is not malfunction.
ⅷVertical stripes may appear in the monitor image if it is shot under bright
conditions (such as a sunny sky). This is not a malfunction.
ⅷThe image displayed on the monitor is intended for use in checking the
composition and does not show the correct focus and exposure
conditions. Image focusing and exposure should be checked on a TV or
PC screen after shooting (
Page 73).
Do not apply excessive force to the monitor and the area around it. Doing so could
cause the displayed image to blur and may also damage the monitor.