Olympus D-150-C-1 - Manual (Page 81)

81
VIEWING OPTIONS
ⅷ When you have to use the AC adapter with the
batteries loaded, follow the procedures below.
It is recommended that you connect the optional AC adapter to the camera and
remove the batteries from the camera before connecting the camera to PC. (When
you don’t plan to use the AC adapter, make sure that the batteries are loaded in the
camera.)
1. Make sure that the USB cable is not connected to the camera.
2. Plug in the AC adapter.
3. Connect the camera to the PC via the USB cable.
When using the AC adapter with the batteries loaded
ⅷ If battery power runs out while the PC is accessing the card in the camera, the
camera turns off in the middle of operation and this could destroy image files
(data).
ⅷ Plugging or unplugging the AC adapter when the camera is connected to a PC
and the batteries are loaded could destroy image data stored on the card and/or
cause the connected PC to malfunction.
Connecting the AC adapter
1. Disconnect the USB cable from the camera and PC.
2. Unplug the AC adapter from the camera.
Disconnecting the AC adapter