Olympus D-150-C-1 - Manual (Page 39)

39
BASIC SHOOTING OPERATIONS
Exposure
compensation * 2
Macro mode * 2
Digital zoom * 2
White balance * 2
Shows the amount of exposure compensation ( Page 65).
The default setting is no exposure compensation.
Shows that the Macro mode is switched on ( Page 61).
The default setting is normal shooting.
Shows the Digital Zoom mode, with “T” indicating telephoto zoom
and “W” indicating wide-angle shooting (
Page 60).
The default setting is no digital zooming.
Shows the use of the white balance control feature which adjusts
the color tone of the image (
Pages 67-68).
The default setting is Auto control.
Clear Sky ( Page 68)
Cloudy Sky ( Page 68)
Incandescent Lighting ( Page 68)
Fluorescent Lighting ( Page 68)
+ 1.0
T
W
When the monitor is off, it will turn on if you press the OK/menu
button (in Shooting mode only).
Pressing the
OK/menu button again turns off the monitor.
* 1 When you change the setting, it remains effective after the camera is turned off.
* 2 When you change the setting, it returns to the factory setting when the camera is turned off.
ⅷ
The timing of the remaining battery power display varies depending on the type
of the batteries in use.
ⅷ
When NiMH batteries are used, the battery alarm indicator will start blinking
sooner than when a lithium battery pack is used.
The monitor may also show other indicators such as the “!” indicator. In this
case, refer to the error messages listed on Page 93.
Auto
(No display)