Olympus D-150-C-1 - Manual (Page 68)

68
ADVANCED SHOOTING FEATURES
HQ
White balance setting 4.
Press the OK/menu button.
[ The camera returns to the Shooting
mode and the monitor shows the white
balance setting.
5.
Press the shutter button.
[ Images can be shot successively while
maintaining the selected white balance
setting.
6.
Close the lens barrier to turn the
camera off.
[ The white balance setting is restored to
AUTO.
If you want an image color tone that resembles what you see under
incandescent lighting, set the White Balance Control mode to
(Clear Sky).
This will produce colors like those seen under an incandescent lamp.
ⅷ Under special light sources, the white balance control circuitry may not work as
intended.
ⅷ After shooting, be sure to check the color tone on the monitor to see if the set
white balance control value is optimal.
ⅷ When you set a White Balance Control mode other than AUTO and use the
flash, the color viewed on the monitor could be different from the color of the
shooted image.
[ AUTO: This is the default setting, which is not displayed on the
monitor. The white balance is controlled automatically so that
colors look natural.
[ (Clear Sky): The white balance is controlled so that colors look
natural in outdoors under a clear sky.
[ (Cloudy Sky): The white balance is controlled so that colors look
natural in outdoors under a cloudy sky.
[ (Incandescent Lamp): The white balance is controlled so that
colors look natural under incandescent lighting.
[ (Fluorescent Lamp): The white balance is controlled so that
colors look natural under fluorescent lighting.
White Balance Settings