Olympus C-730 Ultra Zoom - Manual (Page 103)

102
Chapter 5
Sequential shooting (Cont.)
● In the following situations, sequential shooting (
, , , BKT) is
not available:
– When the record mode is set to TIFF (P. 112) or when the SHQ record
mode is set to ENLARGE SIZE (P. 116).
– When NOISE REDUCTION is set to ON (P. 126).
● If there is not enough space available on the card for the number of frames
you have set during auto bracketing, you cannot continue shooting.
● If the ISO is set to over 200, noise may appear under some shooting
conditions (P. 117).
● If the battery power is low and the battery check blinks during sequential
shooting, shooting stops and the camera starts saving the pictures you
have taken. Whether or not all of the shots are saved depends on how
much battery power remains.
● Since the shutter speed is set to 1/30 sec. max., exposure is decreased
when shooting a dark subject to prevent camera movement.
● To use the external flash during sequential shooting, set the external flash
so that it fires for each frame.
● If a flash is used, sequential shooting (
, ) will be slowed down
because it takes time to charge the flash.
● The internal flash is not available for sequential shooting (
, ) when
using the Self-timer/Remote control function.
● During high-speed sequential shooting, the main flash doesn't fire even if
it's open.
Note