Olympus C-730 Ultra Zoom - Manual (Page 209)

208
Chapter 11
Error codes
If there is a problem with your camera, a blinking error code will appear.
Possible
causes
The card is not
inserted, or it cannot
be recognized.
No more pictures
can be taken.
Writing to the card is
prohibited.
Cannot record, play
back or erase
pictures on this card.
The recorded image
cannot be played
back with this
camera.
Monitor indications
Corrective
action
Insert a card correctly or
insert a different card.
Replace the card or erase
unwanted pictures.
Remove the write-protect
adhesive seal attached to
the card (SmartMedia).
If the card is dirty, wipe the
gold contacts with a clean
tissue and insert it again. If
the problem is still not
corrected, the card cannot be
used.
Download the image to a
personal computer and use
image processing software
to view it. If that cannot be
done, the image file is
damaged.