Olympus C-730 Ultra Zoom - Manual (Page 150)

149
Chapter 7
Erasing pictures
Recorded pictures can be erased. You may use the single-frame erase
function or the all-frame erase function.
1 Select a picture you wish to erase by
using the arrow pad.
● If the picture is protected, cancel the
protection first (P. 148).
2 Press .
● The ERASE screen is displayed.
3 Press
Ñ
to select YES.
● To cancel erasing, select NO and press
, or press again.
4 Press to erase the picture.
This function only erases the picture displayed on the monitor. Erasing further
pictures must be done one-by-one if using this function.
ERASE
YES
N O
SELECT GO
ERASE screen
● It is not possible to erase protected pictures or pictures stored on a card
that has a write-protect seal (SmartMedia).
● Once erased, pictures cannot be restored.
Note
Mode dial
setting
Single-frame erase
Arrow pad
(erase) button
button