Olympus E-620 User Manual

Page 102

Advertising
background image

102

EN

Customizing your camera

8

ISO-AUTO SET

You can set the upper limit and default ISO values when ISO is set to [AUTO].

[HIGH LIMIT]

This sets the upper limit of the ISO value that automatically changes. The upper limit
can be set from 200 to 3200 in 1/3 EV increments.

[DEFAULT]

This sets the value to be normally used when the optimum exposure can be obtained.
The value can be set from 200 to 3200 in 1/3 EV increments.

ISO-AUTO

You can set the shooting mode in which the ISO [AUTO] setting is activated.

[P/A/S]

The [AUTO] setting is activated in all shooting modes except M mode. When
[AUTO] is selected in M mode, ISO 200 is set.

[ALL]

The [AUTO] setting is activated for all shooting modes. The ISO is automatically
selected to obtain the optimal ISO even in M mode.

BULB TIMER

You can select the maximum time (in minutes) for bulb shooting.

ANTI-SHOCK

You can select the interval from the time the mirror is raised until the shutter is released from
1 to 30 seconds.
This diminishes camera shake caused by vibrations when the mirror moves. This feature can
be useful in astrophotography and microscope photography or other photographic situations
where a very slow shutter speed is used, and camera vibration needs to be kept to a
minimum.

x

Notes

• Anti-shock is added to the shooting functions individually (single-frame shooting, sequential

shooting, self-timer shooting, and remote control shooting).

g“Sequential shooting” (P. 61)

W

# CUSTOM

#X-SYNC.

You can set the shutter speed that will be used when the flash fires. The speed can be set
from 1/60 to 1/180 in 1/3 EV increments.

#SLOW LIMIT

You can set the slow limit of the shutter speed that will be used when the flash fires. The
speed can be set from 1/30 to 1/180 in 1/3 EV increments.

w+F

When set to [ON], it will be added to the exposure compensation value and flash intensity
control will be performed.

AUTO POP UP

In

AUTO or scene mode, the built-in flash pops up automatically in low light or backlight

conditions. When set to [OFF], the built-in flash will not pop up automatically.

s0023_e_00_0_unified.book Page 102 Monday, February 2, 2009 5:18 PM

Advertising