Olympus E-620 - Manual (Page 61)

61
EN
3
Focusing and shooting functions
Single-frame shooting o Shoots 1 frame at a time when the shutter button is pressed
(normal shooting mode).
Sequential shooting H l Shoots at 4 frames/sec. for as long as the shutter button is
pressed (during S-AF, MF).
Sequential shooting L O Shoots at the set speed (“O fps” (
gP. 99)) for as long as
the shutter button is pressed.
• Press the shutter button fully and keep it pressed. The
camera will take pictures in sequence until you release
the button.
• Focus, exposure, and white balance are locked at the first
frame (during S-AF, MF).
x
Notes
• During sequential shooting, if the battery check blinks due to low battery, the camera stops
shooting and starts saving the pictures you have taken on the card. The camera may not save
all of the pictures depending on how much battery power remains.
Setting method
Setting display
• Anti-shock display:
A blinking display in the viewfinder and the
D symbol on the super control panel indicates that anti-shock is activated.
g“ANTI-SHOCK” (P. 102)
Sequential shooting
Direct button </ Y/j j
Super control panel i p: [j/</Y]
Viewfinder
Sequential shooting H :
Sequential shooting L :
12-second self-timer :
2-second self-timer :
Remote control :
2-second remote control :
Number of sequential shots
that can be taken
</ Y/j button
j
SELECT SET
Single-frame shooting
s0023_e_00_0_unified.book Page 61 Monday, February 2, 2009 5:18 PM