Olympus E-620 - Manual (Page 93)

93
EN
7
Setu
p fu
nction
s
7
Setup functions
Use the Setup Menu to set the basic camera functions.
For details on using the menu lists, see “Setting on the menu” (
gP. 22).
X (Date/time setting) gP. 15
W (Changing the display language)
You can change the language used for the on-screen display and error messages from
ENGLISH to another language.
s (Monitor brightness adjustment)
You can adjust the brightness and color temperature of the
monitor. Color temperature adjustment will affect only the
LCD monitor display during playback.
Use
hi to switch between j (color temperature) and k
(brightness), and use fg to adjust the value between
[+7] - [-7].
REC VIEW
You can display the picture you have just taken on the monitor while it is being recorded to
the card, and to select how long the picture is displayed. This is useful for making a brief
check of the picture you have just taken. Pressing the shutter button halfway while checking
the picture lets you resume shooting immediately.
[1SEC] – [20SEC] Selects the number of seconds to display each picture. Can be set in
units of 1 second.
[OFF] The picture being recorded to the card is not displayed.
[AUTO q] Displays the image being recorded, and then switches to playback
mode. This is useful for erasing a picture after checking it.
c MENU DISPLAY gP. 23
Setup Menu
SET
’09.03.01
14:01
BACK
ENG. W
s
ON
5SEC
cMENU DISPLAY
FIRMWARE
REC VIEW
j±0 k±0
SET
’09.03.01
14:01
BACK
ENG. W
s
ON
5SEC
cMENU DISPLAY
FIRMWARE
REC VIEW
j±0 k±0
Use fg to select [d], then
press
i.
Use fg to select a function,
then press
i.
i
–5 +2
BACK SET
s0023_e_00_0_unified.book Page 93 Monday, February 2, 2009 5:18 PM