Olympus E-620 - Manual (Page 106)

106
EN
Customizing your camera
8
dpi SETTING
You can set the resolution for printing images in advance. The set value is recorded on the
card with the images.
[AUTO] Automatically set according to the image size.
[CUSTOM] You can make the desired setting. Press
i to display the setting screen.
r/p
You can select which card to use when both a CompactFlash and xD-Picture Card are
loaded.
EDIT FILENAME
You can rename image files to make them easier to identify and organize.
The portion of the filename that can be changed depends on the color space.
g“COLOR
SPACE” (P. 103)
Z K UTILITY
PIXEL MAPPING
gP. 125
CLEANING MODE gP. 125
EXT. WB DETECT
You can disable the white balance sensor used to determine the light source during auto
white balance. This is useful when the light source near the sensor and the light source
illuminating the subject are different.
AF FOCUS ADJ.
You can use the AF sensor to fine-adjust the focusing position to a range of ±20 steps (–: closer,
+: toward )). Normally, there is no need to change this.
[SET AF DATA]
Fine-adjust the AF default value and register the setting. You can also register the
setting according to the lens.
[OFF]
AF focus adjustment is not performed.
[DEFAULT DATA]
Registers and applies all lens AF
adjustment values not registered
individually.
[LENS DATA]
Fine-adjusts the AF for each lens. You
register the adjustment values for up to 20
lenses.
sRGB : Pmdd0000.jpg AdobeRGB : _mdd0000.jpg
You can change the character to OFF, A - Z
or 0 - 9.
LENS DATA SET
No.1 No.1
14-42 F3.5-5.6
14-42 F3.5-5.6
S/N 000000000
S/N 000000000
EC00
S/N 888888888
±88
+20
±88 W
T
CANCEL SET
Use fg to adjust.
s0023_e_00_0_unified.book Page 106 Monday, February 2, 2009 5:18 PM