Olympus E-620 - Manual (Page 51)

51
EN
2
Exposur
e
Compensation value: 0.3, 0.7 or 1.0
• The compensation value will change if the EV step is changed.
g“EV STEP” (P. 101)
Number of frames: 3
Setting display
Start shooting.
• In single-frame shooting, the exposure changes every time the shutter button is pressed.
• In sequential shooting, hold down the shutter button until the selected number of frames are
taken.
• Releasing the shutter button stops flash bracketing shooting. When it stops,
0 blinks in
the viewfinder and
0 is displayed in green on the super control panel.
How AE bracketing compensates exposure in each shooting mode
Depending on the selected shooting mode, exposure is compensated in the following way:
P mode : Aperture value and shutter speed
A mode : Shutter speed
S mode : Aperture value
M mode : Shutter speed
To apply AE bracketing to the exposure value you have compensated:
j Compensate the exposure value, then use the AE bracketing feature. AE bracketing is applied to
the exposure value you have compensated.
Menu
MENU [X] [BRACKETING] [AE BKT]
Viewfinder
 TIPS
AE BKT
WB BKT
ISO BKT
FL BKT
BRACKETING
SET BACK
AE BKT
3F 0.7EV
3F 0.3EV
3F 1.0EV
OFF
Number of
frames
EV STEP
Bracketing
Compensation range
• The exposure value for the remaining
frames blinks during shooting.
s0023_e_00_0_unified.book Page 51 Monday, February 2, 2009 5:18 PM