Olympus SP-590UZ - Manual (Page 42)

 EN
Creating panoramic images
[G PANORAMA]
G PANORAMA
: P r 
Submenu 2 Application
COMBINE IN
CAMERA1 *1*2
Three frames are taken and
combined by the camera. The
user only composes the shots
so that the target marks and
pointers overlap, and the camera
automatically releases the shutter.
The shooting functions are already
preset to the optimum settings for
panoramic shooting.
COMBINE IN
CAMERA2 *2
Three frames are taken and
combined by the camera. The
user composes the shots using
the guide frame and manually
releases the shutter.
COMBINE IN PC
The frames that were taken are
combined into a panorama image
using the OLYMPUS Master 2
software from the provided
CD-ROM. Pictures are taken in
the last [ISO] or [J ] settings
(except for some scene modes).
*1 Not available when  mode is selected.
*2 The [A IMAGE QUALITY] (p. 29) setting cannot be
changed.
The focus, exposure (p. 14), zoom position
(p. 21) and [WB] (p. 30) are locked at the
first frame.
The optical zoom is limited up to 10x.
The flash (p. 23) is locked to
$ (FLASH OFF) mode.
Panoramic images can be edited using
[SHADOW ADJ] (p. 44) only.
“Playing back panoramic images” (p. 28)
Taking pictures with
[COMBINE IN CAMERA1]
1 Press the shutter button to take the first
frame.
2 Move the camera slightly in the direction
of the second frame.
SAVE OK MENU CANCEL
Target mark
Pointer
Screen when combining
images from left to right
3 Move the camera slowly while keeping it
straight, and stop the camera where the
pointer and target mark overlap.
The camera releases the shutter
automatically.
SAVE OK MENU CANCEL
To combine only two pictures, press the
o button before taking the third frame.
4 Take the third frame in the same way as
s tep 3.
After the third frame is taken, the camera
automatically processes the frames and the
combined panoramic image is displayed.
To cancel a panoramic picture during
shooting, press the  button.
When the shutter does not automatically
release, try [COMBINE IN CAMERA2] or
[COMBINE IN PC].
●
●