Olympus SP-590UZ - Manual (Page 54)

 EN
Adjusting the brightness of the monitor
[s]
E SETUP  s
1 Use 78 to adjust the brightness while
viewing the screen, and then press the o
button.
s
SET OK MENU BACK
Setting the date and time [X]
E
SETUP  X
“Setting the date and time” (p. 12)
To select the date display order
1 Press : after setting Minute, and use
78 to select the date display order.
X
Y M
Y M D
D TIME
2009 08 26 12 30
MENU CANCEL
Date order
Setting the date and time in another
time zone [DUALTIME]
E
SETUP  DUALTIME
The date and time set in the [ON] setting are
reflected on the image file names and date
prints.
Submenu 2 Submenu 3 Application
OFF —
Switches to the date and
time set in
[X (Date/time)].
ON
(Proceeds
to the
setting
screen *1 .)
Switches to the date
and time that were set in
[DUALTIME] when using
the camera in another
time zone.
*1 The setting procedure is identical to that in “Setting
the date and time” (p. 12)
The date display order is the same as that
set with [X].
Automatically rotating images shot
with the camera in a vertical position
during playback [PIC ORIENTATION]
E
SETUP  PIC ORIENTATION
During shooting, the [y] (p. 48) setting on
the playback menu is set automatically.
This function may not work properly if the
camera is facing upwards or downwards
during shooting.
Submenu 2 Application
OFF
Information about the vertical/horizontal
orientation of the camera during
shooting is not recorded with images.
Images shot with the camera in a
vertical position are not rotated during
playback.
ON
Information about the vertical/horizontal
orientation of the camera during
shooting is recorded with images.
Images are automatically rotated during
playback.