Olympus SP-590UZ - Manual (Page 52)

 EN
Viewing the image immediately after shooting [REC VIEW]
E
SETUP  REC VIEW
Submenu 2 Submenu 3 Application
OFF —
The image being recorded is not displayed. This allows the user to
prepare for the next shot while following the subject in the monitor or
viewfinder after shooting.
ON
LCD ONLY The last image being recorded is always displayed on the monitor.
CURRENT
The last image being recorded is displayed on the currently selected
display device (monitor or viewfinder). “Switching between the monitor
and viewfinder” (p. 25)
Even when set to [ON], you can resume shooting while the image is being displayed.
Selecting where the top menu is displayed [MENU DISPLAY]
E SETUP  MENU DISPLAY
Submenu 2 Application
LCD ONLY The top menu is always displayed on the monitor.
CURRENT The top menu is displayed on the currently selected display device (monitor or viewfinder).
The submenu chosen in [MENU DISPLAY] will be displayed on the screen when the following
operations are done.
Pressing the  button
Pressing the
D
button in playback mode
Increasing the brightness of the monitor when taking pictures
[LIVE VIEW BOOST]
E SETUP  LIVE VIEW BOOST
Submenu 2 Application
OFF
The subject will be displayed on the monitor at the brightness level according to the exposure
that was set. This allows you to preview the images to be captured on the monitor before
shooting.
ON
The camera will automatically adjust the brightness level and display the subject on the
monitor for easier confirmation. The results of the exposure compensation adjustment will not
be shown on the monitor.
●
●