29 en, Adjusting to a natural color scheme [wb, Selecting the iso sensitivity [iso – Olympus Stylus 1050 SW User Manual

Page 29

Advertising
background image

29

EN

Make the settings for the functions while referring to “Using the Menu” (p. 3).

Adjusting to a natural color scheme
[WB]

K CAMERA MENU X WB

:

K h

s A

Submenu 2

Application

AUTO

The camera automatically adjusts
the white balance according to the
shooting scene.

5

For shooting outdoors under a
clear sky

3

For shooting outdoors under a
cloudy sky

1

For shooting under tungsten
lighting

w

For shooting under daylight
fl uorescent lighting (household
lighting, etc.)

x

For shooting under neutral
fl uorescent lighting (desk lamps,
etc.)

y

For shooting under white
fl uorescent lighting (offi ces, etc.)

Selecting the ISO sensitivity [ISO]

K CAMERA MENU X ISO

:

K

In the ISO setting, although smaller values

result in less sensitivity, sharp images can
be taken under fully lit conditions. Larger
values result in higher sensitivity, and
images can be taken at fast shutter speeds
even under dimly lit conditions.
High sensitivity introduces electrostatic
noise into the resulting picture, which may
give it a grainy appearance.

Submenu 2

Application

AUTO

The camera automatically adjusts
the sensitivity according to the
shooting scene.

80/100/200/400/
800/1600

The ISO (sensitivity) setting is
fi xed by manually selecting it.

Shooting pictures sequentially while
the shutter button is held down
[DRIVE]

K CAMERA MENU X DRIVE

:

K h

s

Submenu 2

Application

o

One frame is shot each time the
shutter button is pressed.

j

*1

Sequential shooting at the focus,
brightness (exposure), and white
balance that is locked in the fi rst
frame.

i

Sequential shooting at a higher
speed than [j].

*1

The shooting speed varies depending on the
settings for [

D IMAGE QUALITY] (p. 28).

“Saving only selected images

from sequentially shot images
([SHOOT & SELECT 1]/
[SHOOT & SELECT 2] mode)”
(p. 32)

When set to [j], [R] (Still picture REC)

(P. 31) is not available.

When set to [

i], fl ash is set fi xed [$]

(FLASH OFF) and [ISO] is fi xed to [AUTO].

When set to [

i], [IMAGE SIZE] is limited

to [

I] or lower. Moreover, [FINE ZOOM]

(p. 30), [DIGITAL ZOOM] (p. 30), and [R]
(Still picture REC) (p. 31) are not available.

book_oima_myu1050SW_en.indb 29

book_oima_myu1050SW_en.indb 29

2008/07/10 11:49:16

2008/07/10 11:49:16

Advertising