Olympus Stylus 1050 SW - Manual (Page 49)

49 EN
Make the settings for the functions while referring to “Using the Menu” (p. 3).
Operating during playback mode
When switched to playback mode by tapping the back of the camera body once, the operations
below can be used.
Display next image: Tap the right side of the camera once
Display previous image: Tap the left side of the camera once
Start slideshow: Tap the top surface of the camera twice. (The slideshow will automatically
start for all images stored in internal memory or on the card, with [BGM] set to [OFF].)
Display next image during a slideshow: Tilt the camera right or tap the right side of the
camera once.
Display previous image during a slideshow: Tap the left side of the camera once.
Stop slideshow: Tap the top surface of the camera twice.
To adjust the tap control
1 Select [CALIBRATE] in submenu 2 and press the
o button.
TOP
SET OK MENU BACK
STR INTVL
NORM AVG
2 Select the part to adjust with 12 and press the o button.
3 Select the [STR] setting with 12 and press the 4 button.
4 Select the [INTVL] setting with 12 and press the o button.
Check the operation of the camera by tapping on the camera after making
the settings.
Turning off the camera sounds [ j SILENT MODE]
j SILENT MODE
Submenu 1 Application
OFF Activates the [SOUND SETTINGS] setting.
ON
The electronic sounds (operating sound, shutter sound, warning sound) and playback
sounds are muted.
[SOUND SETTINGS] (p. 43)
book_oima_myu1050SW_en.indb 49 book_oima_myu1050SW_en.indb 49 2008/07/10 11:49:49 2008/07/10 11:49:49