Olympus Stylus 1050 SW - Manual (Page 50)

50 EN
Printing
2
Turn on the printer, and then
connect the printer and camera.
Connector cover
USB cable (supplied)
Multi-connector
OK PC / CUSTOM PRINT
EASY PRINT START
< button
3
Press the < button to start printing.
4
To print another image, use 34
to select an image, and press the
< button.
To exit printing
After a selected image is displayed on the
screen, disconnect the USB cable from the
camera and printer.
PRINT EXIT
Direct printing (PictBridge *1 )
By connecting the camera to a PictBridge-
compatible printer, you can print images directly
without using a computer.
To fi nd out if your printer supports PictBridge,
refer to the printer’s instruction manual.
*1 PictBridge is a standard for connecting digital
cameras and printers of different makers and
printing out pictures directly.
The printing modes, paper sizes, and other
parameters that can be set with the camera
vary depending on the printer that is used.
For details, refer to the printer’s instruction
manual.
For details on the available paper types,
loading paper, and installing ink cassettes,
refer to the printer’s instruction manual.
Printing images at the
printer’s standard settings
[EASY PRINT]
1
Display the image to be printed on
the monitor.
“Viewing images” (p. 16)
Printing can also be started when the
camera is turned off. After performing Step
2, use
12 to select [EASY PRINT], press
the o button. Use 34 to select an image,
and proceed to Step 3.
book_oima_myu1050SW_en.indb 50 book_oima_myu1050SW_en.indb 50 2008/07/10 11:49:51 2008/07/10 11:49:51