Olympus Stylus 1050 SW - Manual (Page 43)

43 EN
Make the settings for the functions while referring to “Using the Menu” (p. 3).
Viewing the image immediately after shooting [REC VIEW]
x SETUP X REC VIEW
Submenu 2 Application
OFF
The image being recorded is not displayed. This allows the user to prepare for the next
shot while following the subject in the monitor after shooting.
ON
The image being recorded is displayed. This allows the user to make a brief check of the
image that was just taken.
Even when set to [ON], you can resume shooting while the image is being displayed.
Selecting the camera sound and its volume [SOUND SETTINGS]
x SETUP X SOUND SETTINGS
Submenu 2 Submenu 3 Submenu 4 Application
BEEP
SOUND TYPE 1/2 Selects the operating sound and volume
of the camera buttons (except the shutter
button).
VOLUME
OFF (No sound)/
LOW/HIGH
SHUTTER SOUND
SOUND TYPE 1/2/3
Selects the operating sound and volume of
the shutter button.
VOLUME
OFF (No sound)/
LOW/HIGH
8
OFF (No sound)/
LOW/HIGH
— Adjusts the warning sound volume.
q VOLUME
OFF (No sound)/
LOW/HIGH
— Adjusts the image playback volume.
To turn off all sounds at once, make the setting from [ j SILENT MODE] (p. 49).
book_oima_myu1050SW_en.indb 43 book_oima_myu1050SW_en.indb 43 2008/07/10 11:49:40 2008/07/10 11:49:40