Olympus E-3 - Manual (Page 66)

66
EN
5
Reco
rd
mo
de, wh
ite b
ala
nc
e, and pi
cture
mode
After pressing the shutter button, [WB NG RETRY] is displayed:
j When there is not enough white in the image, or when the image is too bright, too dark or the
colors look unnatural, you cannot register the white balance. Change the aperture and shutter
speed settings, then repeat the procedure from Step 1.
Three images with different white balances (adjusted in specified color directions) are
automatically created from one shot. One image has the specified white balance, while the
others are the same image adjusted in different color directions.
• Use the sub dial to set in the A-B direction or the main dial to set in the G-M direction.
Setting display
• Select from [OFF], [3F 2STEP], [3F 4STEP], or [3F
6STEP] for the EV step for both the A-B (amber-blue)
direction and the G-M (green-magenta) direction.
• When the shutter button is pressed down all the way, 3
images adjusted in specified color directions are
automatically created.
To apply WB bracketing to the white balance you have adjusted:
j Adjust white balance manually, then use the WB bracketing feature. WB bracketing is applied to
the white balance you have adjusted.
x
Notes
• During WB bracketing, the camera cannot shoot in sequence if there is not enough memory
in the camera and card for storing more than the selected number of frames.
 TIPS
WB bracketing
Direct button WB + MODEk: EV step in A-B direction/
j
: EV step in G-M direction
Menu MENU[X][WB BKT]
 TIPS
EV step in the G-M direction:
2STEP
EV step in the A-B direction:
4STEP
Viewfinder
Control panel
WB BKT
3F 4STEP
A-B
3F 4STEP
G-M
SELECT GO
Direct buttons setting screen
s0011_e_00_0_unified.book Page 66 Wednesday, September 12, 2007 4:46 PM